For Sale - LED Headlights

Hey all,

I have four each of the two attached pics. These H4 LED headlights are the real deal. As bright as, if not brighter than, a 55W halogen with only a 15W or 20W draw (depending on which type).

The Type 1 bulb in the pictures is a little larger than the Type two and draws 15W in low beam or 18W in high beam mode.

The Type 2 draws 20W low and 20W high.

As with most LED headlights, the distance and dispersion of the beam has a lot to do with the reflector on your headlight. The third pic shows the throw of an LED headlight in my Ducati Monster. It easily shines out to 200 ft and probably further.

Headlights are $45 each. Shipping is free in the USA, but please add $10 for international orders. I will be ordering some more soon and depending on which of these types seems to be the most popular, I'll probably be getting more of those.

Please email info@sparckmoto.com or comment in this thread if you'd like more info.

Thanks again,
Matt

Also... the units have bare wires and will need to be wired to hook into your headlight bucket.

Done. Same paypal address as usual?

I remember seeing 6V ones being tested. Are you going to be selling 6V versions?

trek97 said:

Done. Same paypal address as usual?

Click to expand...

Yup!

CALfeRacer said:

I remember seeing 6V ones being tested. Are you going to be selling 6V versions?

Click to expand...

Both of these models are rated for as low as 8V. I haven't yet tested them on a 6V bike, but they do work just fine when I hook them up to my battery charger on the 6V setting.

Does these fit into the CB360 Bucket without modification? I'll be also getting a H4 Reflector from SCI.

Not the stock bucket, no. The stock bucket uses a sealed beam light, which includes the lens and reflector. These are just the bulb.

Wasn't clear on my post, what I meant to say was I have a CB360 headlight bucket with a H4 Reflector that replaces the sealed lens and reflector. Would the bulb fit in the new reflector?

Most of the time, yes. In my experience some of the smaller ones are a tough fit. I had a slimline one I had to cut a bit out of on the back, but it still fit inside the reflector and the bucket just fine after I modified it.

Thanks! Just curious as I'm not that handy with cutting things up on the bike.