Monkey wrench cycles
New Member
One of the projects im doing at my shop. Starting with a 70's CB750 chopper with an original Amon Savier hardtail frame, original Invader rim, etc. Customer picked this up with a seized engine.
I started by pulling off the old extended 35mm front forks and 19" spoke wheel and replacing with a springer front end and 16" Harley front wheel. Next we pulled the tank and put a sportster tank with rolled edges. Next we will be going with a newer sportster 16" rear spoked wheel for a 180 tire, new controls, clean up frame, rewire the whole bike, paint and powdercoat everything, and lots of little changes here and there. Ill update here as we make progress.
I started by pulling off the old extended 35mm front forks and 19" spoke wheel and replacing with a springer front end and 16" Harley front wheel. Next we pulled the tank and put a sportster tank with rolled edges. Next we will be going with a newer sportster 16" rear spoked wheel for a 180 tire, new controls, clean up frame, rewire the whole bike, paint and powdercoat everything, and lots of little changes here and there. Ill update here as we make progress.