crazypj
Split personality, I fake being smart
It really isn't needed plus many of the tiny pumps are not rated above 150f~175f and you WILL be feeding it oil around 200f~250f (it isn't really cost effective for high temp pump or it needs too many amps to get decent flow)
Use good oil, semi or full synthetic and do oil mods I've listed multiple times.
Use either 10W/40 or 5W/40 full synthetic JASO Spec oil
DO NOT USE 20W/50 - EVER cam bearings can seize in as little as 50 miles at highway speeds (70mph+)
Gun drill cam, open oil feed 'jets' modify oil transfer piece, good for sustained 11,000+rpm - 115mph
Use good oil, semi or full synthetic and do oil mods I've listed multiple times.
Use either 10W/40 or 5W/40 full synthetic JASO Spec oil
DO NOT USE 20W/50 - EVER cam bearings can seize in as little as 50 miles at highway speeds (70mph+)
Gun drill cam, open oil feed 'jets' modify oil transfer piece, good for sustained 11,000+rpm - 115mph