Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I've got a project in the works and I need to prototype one of these units, and we will eventually be running production of 600+ units if the prototypes get approved.
Its a 3" plastic placard that has appears to have raised white text and image. The photo is crap, we are still in early phases.
Anyone know of a technique for getting these made in one shot, mold & color? Or do I need to have the mold done first and the color added post production?
They will be used indoors to label trash and recycling receptacles. I am researching production options, if you're able to produce a similar product I can PM you my email and we can discuss further
Nick, if you're interested in doing it in vinyl, I'll put you in touch with my buddy in Baton Rouge. This same the same guy who wrapped my DS7. I know he could handle it, commercial jobs is what he does.
Nick, if you're interested in doing it in vinyl, I'll put you in touch with my buddy in Baton Rouge. This same the same guy who wrapped my DS7. I know he could handle it, commercial jobs is what he does.
I was at a manufacturing company and they were painting the raised letters on license plate frames for a car dealership. There was a small fixture that they put the frame in and then pulled a roller across it and the raised area was painted perfectly.
The operator popped it out and put another one it what seemed every 15 seconds.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.