completed a 2 rides in the last week. Now up to 150km on the ace125.
Popped the lid off and checked the valve clearance: Exhaust 0.003 and inlet 0.0025 was still abit warm though after a 60km ride. I will have to check it again tomorrow.
get plenty of thumbs up from fellas stuck in their vehicles lol. Expecially with my leather wraped helmet and goggles on LOL
Many fun times to be had, and I am holding off to modding the engine until it's had a good 500km on it. I don't mind the current power (or lack of).
I have an FJ1200 & TRX850 for power fun.
Things I'll do:
remove the exhaust - pack it up.
Get a pipe guy in town to bend me a stainless header up, and purchase a stainless exhaust (should be lighter)
remove the emissions thingy and put the plate in.
some new jets
new front sproket
better bars - more forward and lower
bar end mirrors
new tyres
Thats probably about it.
possibly:
remove electric start
rear mudguard
new smaller brake light & numberplate locator.
Hopefully by this time we will have done away with Rego stickers all together and only need the number plate for identification.
Cheers, S.
Image below is not showing - thought I would link drop box image, but nevermind.
have a look here: https://www.dropbox.com/s/i9abs0jf592djlg/ace.jpg