* Laugh it up fuzzball

Refresh History
  • Nj732port: no usd forks but def a nice flat seat
    Nov 19, 2018, 18:26:38
  • Nj732port: they dont have good fu emojis
    Nov 19, 2018, 18:26:56
  • advCo: Whats up folks
    Today at 09:44:46
  • JustinLonghorn: Morning Muchachos.
    Today at 09:52:25
  • Nj732port: yooo
    Today at 09:56:54
  • advCo: Just waiting for tomorrow to be over
    Today at 09:57:09
  • advCo: Holiday lull here at wrok
    Today at 10:03:57
  • Hurco550: holiday "get ready for an audit on monday" panic here at work haha
    Today at 10:18:13
  • advCo: That sucks.
    Today at 10:20:32
  • JustinLonghorn: One of my busiest contracts ends on 12/9. So, there is a mad push to finish all PCB's on that contract.
    Today at 10:23:48
  • JustinLonghorn: I too will be working for the entire Thanksgiving weekend.
    Today at 10:24:07
  • Nj732port: im sitting in bed been up since 625
    Today at 10:26:28
  • JustinLonghorn: I leave for work at 4:30 am.
    Today at 10:27:38
  • Hurco550: Forget that. I leave at 7, and thats early enough for me haha. Usually dont leave till somewhere between 7:30 and 9:00 p.m. most days though, so i make up for it on the other end haha
    Today at 10:36:47
  • JustinLonghorn: I usually get home around 5.
    Today at 10:44:01
  • JustinLonghorn: With travel, it is usually a 12 hour day.
    Today at 10:44:18
  • JustinLonghorn: and lately it has been 7 days a week.
    Today at 10:44:37
  • JustinLonghorn: Work is stupid.
    Today at 10:44:43
  • advCo: I leave at 6:50, get in at 7. Leave at 5
    Today at 10:49:07
  • advCo: Nobody is starting any projects the few days beforeThanksgiving though, so we're twiddling our thumbs.
    Today at 10:49:35
  • advCo: Weird, I can't find the small needle bearings inside the crankcase halves on the parts fiche for the z50. Hmm
    Today at 11:29:38
  • Hurco550: its one of them fancy invisible ones
    Today at 14:00:04
  • advCo: I hate those
    Today at 14:52:46
  • Hurco550: im currently spending all my fun monies on neglected maintenance items for my truck. Idler arm, pitman arm, master cyl, u joints, nicopp brake line etc etc. should be good for a few more years once i fix those though until the next thing shits the bed
    Today at 15:23:48
  • JustinLonghorn: I am still debating a new welder purchase. It's either that or I put money into the two chop builds.
    Today at 15:27:53
  • Hurco550: welder first. the chops will come and go, welder is a good investment
    Today at 15:43:06
  • JustinLonghorn: [link]
    Today at 15:53:49
  • JustinLonghorn: I am either going to buy that or an Eastwood Mig 185
    Today at 15:54:03
  • JustinLonghorn: [link]
    Today at 15:54:11
  • JustinLonghorn: Sorry, 175
    Today at 15:54:44
  • SONIC.: Get the miller. Eastwood is a great machine until something goes wrong, then you're shit out of luck. Been there done that. I've been slowly replacing mine with miller and Lincoln because literally zero shops will work on the Eastwood if something goes wrong, and eastwood doesn't even have electrical schematics for their welders
    Today at 16:03:45
  • Hurco550: agreed with that statement
    Today at 16:05:34
  • advCo: I would like a spool gun. I have the HF MIG 170 and its been a great machine. Bought it in '14 and haven't had a single issue. Granted, I don't weld every day but I've laid quite a bit of bead with it.
    Today at 16:28:19
  • Kamn: Afternoon Folks, what about the Vulcan series at HF?? They are made by hobart IRK. And I want to get the spool gun for the mig i have
    Today at 16:58:03
  • Kamn: sorry, I meant IRC
    Today at 16:58:36
  • advCo: Whats up kamn
    Today at 17:30:07
  • Kamn: not much, long day and I finally received the coil module for the cx500, maybe i can get it finished up tonight and out of hair this week
    Today at 17:56:58
  • Kamn: how you doing advCo?
    Today at 17:57:11
  • Hurco550: vulcan is not made by hobart. In fact, hobart and miller are owned and produced by the same parent company. Hobart is that companies economy line while the miller brand is their commercial line. If i remember correctly, the vulcan line is made by a company out of Indiana
    Today at 18:06:49
  • Kamn: Ahh, I had read somewhere that they were made by hobart .....maybe they meant hobart copy.
    Today at 18:09:48
  • advCo: I got the Chicago electric MIG. Proudly made by China
    Today at 18:09:59
  • advCo: Pretty good man trying to make it through the work day. Weather is decent so I'm going to head home and try and get some metalwork on the Bus knocked out
    Today at 18:11:17
  • Kamn: hell yeah, that bus needs to be driven
    Today at 18:36:20
  • Kamn: I still say you drop a 911 motor and tranny in it
    Today at 18:36:39
  • advCo: Ha, its early so its designed around the type 1 doghouse motor. It'd be less work to put a subie in it
    Today at 18:40:55
  • Kamn: that sound good as well, Jap it up. Maybe AWD it??
    Today at 18:47:09
  • advCo: Lol, you fab up a drivetrain for me and I'll do it
    Today at 18:50:13
  • Kamn: if I lived anywhere close to you, I would be there with  my tools to help you get it fabbed up
    Today at 18:53:33
  • advCo: Would be rad. Anyways I'm off to the shop. Later
    Today at 18:56:43
  • Kamn: later dude
    Today at 19:01:31

* Recent Pictures - click on picture to go to post

Posted by: Rat_ranger
Posted by: Rat_ranger
Posted by: Rat_ranger
Posted by: Rat_ranger
Posted by: irk miller
Posted by: irk miller
Posted by: Rat_ranger
Posted by: Rat_ranger
Posted by: Rat_ranger
Posted by: goodoltup
Posted by: goodoltup
Posted by: goodoltup
Posted by: Knoxes
Posted by: Knoxes
Posted by: Knoxes
2014-04-16 09.47.49.jpg
Posted by: Knoxes
2014-04-16 09.47.55.jpg
Posted by: Knoxes
Posted by: hooligan998
Posted by: hooligan998
Posted by: hooligan998