collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: 1974 CB360 - first bike/build  (Read 8304 times)

Offline crazypj

  • Posts: 12950
  • Split personality, I fake being smart
Re: 1974 CB360 - first bike/build
« Reply #130 on: May 05, 2018, 14:49:53 »
Brendon used a flat sheet with curve on his 360, wheel gets close but doesn't touch.
I think we drilled a couple of 5~6mm holes in original side mounts, the curve plus only 2 bolts stops things moving around or vibrating too much
It gave him somewhere to put various stickers  ;D
Reply 714 just after we finished putting it together
http://www.dotheton.com/forum/index.php?topic=11736.700
 
« Last Edit: May 05, 2018, 14:53:44 by crazypj »
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline huck_finn

  • Posts: 155
    • 1974 CB360
Re: 1974 CB360 - first bike/build
« Reply #131 on: May 17, 2018, 17:08:05 »
Slow going as of late. My m-unit came in (v2, no bluetooth), along with an m-button. But I haven't had time to do much with it. I went through two more versions of my headlight brackets, they were too long...just like PJ mentioned. My headlight bucket just didn't fill up the space like I had hoped. I shortened them, and got the headlight tucked back as far as I could get it without putting pressure on any of my cables. The first image makes it look like there is about a mile's worth of space that I could have gotten rid of, but you can tell from the second photo that it is pretty snug.