Pretty sure float height on the 360 is somewhere between 19-21 mm. 25 mm would lean it out not enrichen.
Ok so off the carbs come to change float high to 21mm, but again... that probably won't fix it.advCo said:Pretty sure float height on the 360 is somewhere between 19-21 mm. 25 mm would lean it out not enrichen.
crazypj said:Don't know3 where you saw how to measure but that's wrong. Carbs inverted, tilt to about 70 degrees so arm is just contacting spring loaded shut off valve. Measure from gasket face to highest point of float. Service manuals always show carbs completely inverted but that is only to make the pictures easier to fit into the space available. Here's a quick pic of carbs I got Saturday, level is way too low
crazypj said:If your getting 25mm at that angle, the only thing I can think of is the retainer screw came out and valve seat has moved. I've never seen or heard of it or had it happen but anything is possible
Uuhmmmm,maybe, if your Shawn Not having 'screen name' with carbs makes it 'interesting' trying to communicate. Not a problem when I only have one every two~three months but 3 in a week confuses the hell out of me ;Dcb360j said:Do these happen to be my dilapidated carbs? haha
crazypj said:Uuhmmmm,maybe, if your Shawn Not having 'screen name' with carbs makes it 'interesting' trying to communicate. Not a problem when I only have one every two~three months but 3 in a week confuses the hell out of me ;D