2004 GSXR Front End + Magnesium Race Wheel

I have a front end off of a 2004 GSXR 1000. Selling the front end with or without the wheel.

The wheel is a really nice Marvic Penta magnesium wheel, 17" with a Shinko tire that's in decent shape.

The front end includes everything you see: caliper, clip-ons, ignition with key, steering damper, Nissin master cylinder...etc.

The forks attached to the triples have damaged caps. They are still removable, just the adjusters are messed up. So in including with the sale of the complete fork set an additional fork set that have excellent caps. They can just be swapped but you get everything with the sale.

$450 + shipping for the forks and spare set

$400 + shipping for the wheel and rotor

Buy it all and $800 + shipping.

I estimated shipping with UPS and its roughly $50-60 depending on location.

Some pics...

Bump.

Wheel sold. Bump for the forks.


Sent from my iPhone using Tapatalk

I want the forks gone. $425 shipped in the US

so is it 2 sets for forks with one set of triples? do you have both calipers or is it just one? Rotors come with the forks?

AMD500 said:

so is it 2 sets for forks with one set of triples? do you have both calipers or is it just one? Rotors come with the forks?

Click to expand...

Yessir two sets of forks for one set of triples. But the second set of forks would be good for the caps and internal parts only.

The fork set that is in the triples are fully functional as is, just could use the caps off the other set that comes with the sale.

The rotor went with the wheel when it sold, and the front end came with one caliper (one rotor was used on the wheel).

Open to offers.

Okay so I replaced the bad fork caps with good ones with working preload adjusters. Now you're looking at one good front end.

So it's $450 shipped for the good front end, correct?

kbaszak said:

So it's $450 shipped for the good front end, correct?

Click to expand...

Yessir that is correct, assuming you're in the US - looks like you're in Ohio.

And I'll include the spring compressor required to disassemble these types of forks. I had to purchase this for $20.

Sale pending...

Sold