Replacement ignition switch for '76 KZ400

Bcon615

New Member
So, I'm looking around for a replacement ignition switch for my 1976 KZ400. For some reason, it seems that it is tough to find anything not heavily used for a '76. Does anyone know of a place that makes replacements? I also see a lot of affordable replacements on eBay, but they seem to be for '78's and newer. Any chance that these would work? See below:
http://www.ebay.com/itm/Kawasaki-KZ200-250-KZ400-Ignition-Switch-Assembly-27005-094/162137779999?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D45041%26meid%3D38b9c8fd9dd7414b986e89065cb31438%26pid%3D100005%26rk%3D1%26rkt%3D3%26sd%3D172721206568

- Thank you in advance!
 
Most ignition switches will work (electrically speaking) on any bike, but you may need to match up the wire colors, change connectors and/or terminals, or possibly figure out a mounting method. If the switch looks the same in most regards, it probably is.
 
Im running these on both my KZs

https://www.z1enterprises.com/handlebar-switchblock-rh-z1-kz900.html
 
Back
Top Bottom