1986 BMW R80 Bobber/Tracker Build

findyourexit

www.findyourexit.com
G'day folks,

I've decided after some deliberation to start a thread of my own here to cover my 1986 BMW R80 Bobber/Tracker build. I know there's a distinct section for "Trackers" and this section is for "Bobbers", but I feel like perhaps my build will fit into both somewhat. That said, I also feel that it will be a little more "bobber" looking than "tracker", hence my posting it here.

Anyway, without ranting too much - I've made a fair bit of progress already and keep a blog of my own to cover the entire build. I'll throw links to each stage into this thread to bring anyone who is interested/reading up to speed. To begin with, here is the donor: http://findyourexit.com/zi-germans-are-coming/
 

Attachments

  • Photo-1-05-2014-10-48-11-pm (1).png
    Photo-1-05-2014-10-48-11-pm (1).png
    1.4 MB · Views: 509
  • stage1 (1).png
    stage1 (1).png
    1.6 MB · Views: 562
The removal of the stock fairings:
http://findyourexit.com/plastics-be-gone/
 

Attachments

  • stage2 (1).png
    stage2 (1).png
    1.4 MB · Views: 497
  • stage3 (1).png
    stage3 (1).png
    1.5 MB · Views: 603
The comprehensive motor rebuild order from MotorWorks in the UK:
http://findyourexit.com/while-we-wait/
 

Attachments

  • MotorWorks_Order1.png
    MotorWorks_Order1.png
    36.7 KB · Views: 3,003
  • carburetor_cleanup (1).png
    carburetor_cleanup (1).png
    1.1 MB · Views: 449
A funny/random find and a tiny bit of trivia that I discovered during the tear-down:
http://findyourexit.com/treasures-within/
 

Attachments

  • Photo-12-05-2014-5-43-17-pm.png
    Photo-12-05-2014-5-43-17-pm.png
    1.2 MB · Views: 439
While waiting for my order to arrive from MotorWorks, I spent a bit of time tidying up other parts of the bike:
http://findyourexit.com/tidied-triple-clamps/
 

Attachments

  • triple_clamp_cleanup_comparison (1).png
    triple_clamp_cleanup_comparison (1).png
    1.1 MB · Views: 436
  • top_triples_clean_pieces (1).png
    top_triples_clean_pieces (1).png
    1.1 MB · Views: 424
In an effort to keep the build moving, I prepared a checklist of sorts to keep track of what I needed and what I had already.

I spent a fair bit of time looking into which speedometer/tacho I was going to run:
http://findyourexit.com/the-parts-checklist/
 

Attachments

  • ace-4453AS.png
    ace-4453AS.png
    216.3 KB · Views: 2,894
While I continued to await the arrival of the MotorWorks order, I got to preparing the motor for paint. The first stage of this was to get the motor ready for removal from the frame. More info and photos in my blog post:
http://findyourexit.com/off-with-your-head/
 

Attachments

  • Photo-24-05-2014-3-55-48-pm.png
    Photo-24-05-2014-3-55-48-pm.png
    1.4 MB · Views: 460
  • Photo-24-05-2014-6-30-49-pm.png
    Photo-24-05-2014-6-30-49-pm.png
    1.5 MB · Views: 431
  • Photo-24-05-2014-6-16-16-pm (1).png
    Photo-24-05-2014-6-16-16-pm (1).png
    1.4 MB · Views: 432
A bunch more work done to prepare the motor for paint. A load of pics and extra info in the related blog post:
http://findyourexit.com/motor-paint-preparation/
 

Attachments

  • Photo-26-05-2014-8-44-12-pm.png
    Photo-26-05-2014-8-44-12-pm.png
    1.3 MB · Views: 488
  • Photo-26-05-2014-10-53-28-pm.png
    Photo-26-05-2014-10-53-28-pm.png
    989.8 KB · Views: 423
  • Photo-26-05-2014-11-21-46-pm.png
    Photo-26-05-2014-11-21-46-pm.png
    1.5 MB · Views: 491
Motor back from two pack paint - looking a lot nicer than how she was originally! Plenty more pics and info:
http://findyourexit.com/blackened-heart/
 

Attachments

  • Photo-2-06-2014-6-32-54-pm.png
    Photo-2-06-2014-6-32-54-pm.png
    1.3 MB · Views: 435
  • motor_comp_plain_writing.png
    motor_comp_plain_writing.png
    1.8 MB · Views: 451
The package from MotorWorks UK arrived! Full rundown of all parts in the order:
http://findyourexit.com/care-package-has-arrived/
 

Attachments

  • Photo-28-05-2014-6-03-08-pm.png
    Photo-28-05-2014-6-03-08-pm.png
    1.4 MB · Views: 443
With the parts necessary for the motor rebuild available (thanks to the arrival of my MotorWorks order), I got to rebuilding the clutch and top-end. My process is documented in this blog post:
http://findyourexit.com/airhead-clutch-rebuild/
 

Attachments

  • Photo-24-05-2014-5-58-09-pm.png
    Photo-24-05-2014-5-58-09-pm.png
    1.3 MB · Views: 476
  • Photo-5-06-2014-7-44-46-pm.png
    Photo-5-06-2014-7-44-46-pm.png
    1.4 MB · Views: 383
  • Photo-5-06-2014-8-02-21-pm.png
    Photo-5-06-2014-8-02-21-pm.png
    1.5 MB · Views: 388
  • Photo-8-06-2014-2-26-06-pm.png
    Photo-8-06-2014-2-26-06-pm.png
    1 MB · Views: 410
The clutch rebuild was out of the way, so the next port of call was the top-end. Here's a rough outline of the process with pics:
http://findyourexit.com/on-with-your-head/
 

Attachments

  • Photo-8-06-2014-4-33-53-pm.png
    Photo-8-06-2014-4-33-53-pm.png
    1.4 MB · Views: 393
  • Photo-8-06-2014-6-38-37-pm-1.png
    Photo-8-06-2014-6-38-37-pm-1.png
    1.2 MB · Views: 563
Clutch sorted and top-end sorted (mostly) - I now had the perfect opportunity to prepare the rear section of the frame. It was easy to chop the necessary tabs and brackets with the drive-shaft out. A better idea of what was chopped can be seen in the pics in this blog post:
http://findyourexit.com/one-up/
 

Attachments

  • Photo-9-06-2014-8-29-11-pm.png
    Photo-9-06-2014-8-29-11-pm.png
    1.4 MB · Views: 400
  • Photo-10-06-2014-6-19-12-pm.png
    Photo-10-06-2014-6-19-12-pm.png
    1.4 MB · Views: 805
With the rear frame section sorted, I was able to proceed with refitting the drive-shaft, suspension and rear wheel. A quick overview and some pictures that I just posted on my blog:
http://findyourexit.com/unicycle-no-more/
 

Attachments

  • Photo 10-06-2014 8 25 14 pm (1).png
    Photo 10-06-2014 8 25 14 pm (1).png
    1.2 MB · Views: 794
  • Photo 10-06-2014 8 03 04 pm.png
    Photo 10-06-2014 8 03 04 pm.png
    1.4 MB · Views: 407
  • Photo 9-06-2014 12 06 46 pm.png
    Photo 9-06-2014 12 06 46 pm.png
    1.9 MB · Views: 457
amazing how that bike went from blah to ahhh just by removing the fairings! Pretty sweet so far. engine looks great
 
redahtamn said:
amazing how that bike went from blah to ahhh just by removing the fairings! Pretty sweet so far. engine looks great

Thanks redahtamn! I'm really happy with how the motor paint turned out 8)

I totally agree about those fairings - they just had to go!

I've made some further progress since my last post, so I'll be writing up a blog post and sharing it here later today most likely! ;)
 
A crazy weekend meant I didn't get much time to write up multiple updates, however I did get around to writing up this one. The build is now notoriously close to its first test run since the rebuild! A better idea of where things are up to and more pics on my new post:
http://findyourexit.com/arm-the-torpedoes/
 

Attachments

  • Photo 11-06-2014 9 48 27 pm.png
    Photo 11-06-2014 9 48 27 pm.png
    1.3 MB · Views: 375
  • Photo 12-06-2014 9 39 48 pm.png
    Photo 12-06-2014 9 39 48 pm.png
    1.4 MB · Views: 380
  • Photo 12-06-2014 9 19 55 pm.png
    Photo 12-06-2014 9 19 55 pm.png
    1.3 MB · Views: 373
SHE LIVES!
A complete run-down and more pictures (and video) of the R80 firing up for the first time following the motor top-end and clutch rebuild:
http://findyourexit.com/she-lives/

http://www.youtube.com/watch?v=W7qK3mChYO0
 
Paint, paint, paint and more paint. I spent the weekend we've just passed painting the wheels and the entire front-end. More pictures and info on the paint/process in the post I just made on my blog:
http://findyourexit.com/paint-it-black/

On a related side note, I've been running a Facebook page for those social butterflies among us to follow the build also:
http://www.facebook.com/findyourexit

Thanks for following the build and loads more to come soon!
 

Attachments

  • Photo-22-06-2014-6-34-50-pm.png
    Photo-22-06-2014-6-34-50-pm.png
    1.3 MB · Views: 363
  • Photo-22-06-2014-2-50-44-pm.png
    Photo-22-06-2014-2-50-44-pm.png
    1.4 MB · Views: 331
  • Photo-22-06-2014-5-06-02-pm.png
    Photo-22-06-2014-5-06-02-pm.png
    1.1 MB · Views: 377
Back
Top Bottom