collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: Fork Dust seal question  (Read 317 times)

Offline 1fasgsxr

  • Posts: 1120
Fork Dust seal question
« on: Oct 02, 2017, 10:23:55 »
Was there any motorcycles out there with standard dust boots for the 33mm Honda forks. I don't want gators..  I would rather buy a direct fit than a universal. These are for my 350F Honda..and I am not running the factory headlight ears.

Thanks

Offline 1fasgsxr

  • Posts: 1120
Re: Fork Dust seal question
« Reply #1 on: Oct 02, 2017, 10:49:07 »
Are the 400F forks the same as the 350f ??

Re: Fork Dust seal question
« Reply #2 on: Oct 02, 2017, 11:04:22 »
Yes, pretty much, except that seal. Same diameter (33mm).
"Remember when Goldwings were sexy? Me neither" -- Comet Tavern bathroom, Seattle.

Offline 1fasgsxr

  • Posts: 1120
Re: Fork Dust seal question
« Reply #3 on: Oct 02, 2017, 13:03:25 »
are the lowers the same size where said dust boot goes on?

Offline 1fasgsxr

  • Posts: 1120
Re: Fork Dust seal question
« Reply #4 on: Oct 02, 2017, 13:06:28 »
Just so we are clear... # 6 in this diagram

Re: Fork Dust seal question
« Reply #5 on: Oct 02, 2017, 14:59:31 »
No, the lowers are different -- you can't switch out the 350F chromed cover with the 400F dust seal -- sorry, should have been clearer.
"Remember when Goldwings were sexy? Me neither" -- Comet Tavern bathroom, Seattle.

Offline 1fasgsxr

  • Posts: 1120
Re: Fork Dust seal question
« Reply #6 on: Oct 03, 2017, 09:58:09 »
Thanks for the info.