Head swap

karlven

New Member
Hi all,
I have a problem with the thread on the heads where the spark plugs screw in, I think it's crossed.
I have another head I can use and after doing a quick look on a few forums it seems I can just bolt it on....
Is this correct I always assumed there was a lot more involved in this.
Thanks.
 
New gasket and reinstall the cams...I would put new valve stem seals before installing...if all the
Parts in the other head a ok should be pretty simple.
 
The spark plug hole is cross-threaded? You can heli-coil a spark plug hole without taking anything apart.
 
Back
Top Bottom