CANNFAB
New Member
How's it going everybody! I bought this '72 CB350 in 2014, absolutely chopped to pieces and not running. I fabricobbled it back together with parts I had laying around, and ended up with what you see in the picture below. After having two kids and going through a career change, I'm finally back in a place in which I have the time and money to start toying with this bike again.
A little background about myself, I come from a heavy industrial background, and have worked in all sorts of industrial environments doing maintenance, repair and overhaul. Before then, I worked as a machinist, and on nights and weekends I run a machine and welding/fabrication shop out of my basement called CannFab Machine Works. I'm fairly skilled at CAD/CAM, and am happy to assist in the design and machining of any custom parts that you guys may need, it's my favorite aspect of being a machinist.
Looking forward to making my way around the board, cheers!
-Russ
A little background about myself, I come from a heavy industrial background, and have worked in all sorts of industrial environments doing maintenance, repair and overhaul. Before then, I worked as a machinist, and on nights and weekends I run a machine and welding/fabrication shop out of my basement called CannFab Machine Works. I'm fairly skilled at CAD/CAM, and am happy to assist in the design and machining of any custom parts that you guys may need, it's my favorite aspect of being a machinist.
Looking forward to making my way around the board, cheers!
-Russ