Latest project - Suzonda WTF200/2 in progress

NoRiders

Over 1,000 Posts
Hi (if anyone is actually reading the UK posts? :/ ) Thought I'd post a quick review of my latest project.

I'm working with what I have and trying to budget hard as I can't really justify another bike, but couldn't resist throwing parts I have or obtain uber cheaply together.

I fancy a 2smoker lightweight street tracker style ring a dingding bike.

I had the Honda frame, scored a cheap SB200 engine, then went to Kempton and bought the swingarm, forks, wheels and headlamp for a total of £75. Facebook turned up the CB200 tank for £72 delivered and I'm on my way heheh ;)

Here'tis.

 
Re: Latest project - Honduki WTF200/2 in progress

beachcomber said:
Oh,oh. - another gem in the making !

Thanx beachy......not too sure it'll turn out a gem.......cubic zirconia perhaps ;)
 
Re: Latest project - Honduki WTF200/2 in progress

That could be a good laugh to ride if it all comes together with the right trail and rake


Sent from my iPhone using Tapatalk
 
Re: Latest project - Honduki WTF200/2 in progress

Alex jb said:
That could be a good laugh to ride if it all comes together with the right trail and rake


Sent from my iPhone using Tapatalk

I hope so Alex ;D Still got to align the set up, including the swingarm/shock mounts to raise the rear a touch. The forks look to be fine in length and tyres will make a difference too.
 
Popeye SXM said:
I'm in, looks like you are having fun

I'm enjoying the parts sourcing and spec finding exercise. Lots more to think about compared to my previous CBX project....this needs much more detailed attention to make it work.
Keep'em peeled.
 
Titan performance said:
You have my attention.........sounds fun !

Thank you....yoo da man when it comes to Suzuki 2smokers I hear ;)

Next job....strip engine...yikes!!
 
Rear brake system turned up still connected, bled and working ha!



Do I paint the caliper red, gold or silver? :-\
 
Been buying agin...;)



GSX1100 axle spindle with fittings.
SB200 clutch plates
Gudgeon pin circlips
NSR front axle spindle

I've decided the default is 'hope it fits?' on this build haha!
 
NoRiders said:
Been buying agin...;)



GSX1100 axle spindle with fittings.


I've decided the default is 'hope it fits?' on this build haha!

After an hour on the bench wirewheel....:)

 
Back
Top Bottom