98' 750 EFI throttle body question

I've decided for my project that EFI with microsquirt is going to be the best option for me. However, my research isn't turning up much in the way of throttle bodies that will work with the DOHC 750s. Some people have mentioned some TB's but Ive only seen it done on the SOHC models. Is there a set of TB's that are close enough to port matching that silicon boots will get the job done?

If it has 34mm carbs the throttle bodies from a 2001 gsxr600 should be close to fitting. The spacing is 80-80-80, so it might need to be spaced out a little between 2-3, or it might be close enough. They are very simple to respace, I'm using the outer 2 from a set on my XS650, removed the computer controlled butterflies and extended the linkage no problem.

https://youtu.be/3yVqqjFXM-c