A little something I put together!

03rangerxlt

Been Around the Block
One of my uncles was told by his doctor to quit drinking, diet, or die. He pushed his commercial grade kegerator outside and threw a tarp over it, wisely choosing life! My dad knew my wife and I were getting into home brewing, and suggest I call him and see if he wanted to sell it.

My uncle said he would be happy to give me the kegerator for free if I could get it from NJ to GA. He threw in two 5lb CO2 bottles, two regulators, two commercial keg couplings, and beer lines.

My parents went and scooped up the kegerator, and passed on the bad news to me that they spent $200 in gas and tolls round trip, and the kegerator was in rough shape. Turns out that the tarp broke down and rain leaked onto and into the kegerator for a couple of years. My wife and I drove up to NJ/PA for a family event and picked up the kegerator and loose parts and brought them back to GA. The kegerator turned on, but didn't cool. It smelled horrible, and was coated inside with slimy gunk.

I pulled the tower off the thing and with lots of elbow grease and brasso, I was able to bring it back. It was looking pretty bad until I set to cleaning it up. I installed a new shank and tap on it, as the old parts were sketchy, with old spiders nests in the tap and crud in the shank. I bought all new beer lines to hook up to it.

On Craigs list, I found a small fridge for $40 that will fit two 1/4 kegs. I had to set aside the two commercial keg couplers as they look like they need a good cleaning and rebuild, and I bought a low profile couple to fit on a commercial keg. I also bought fittings for a home brew keg (that my wife and I got as a wedding gift!), and some quick disconnect pieces for the CO2 and beer lines. Now I am able to quickly switch between my home brew keg and a commercial keg. My wife drinks Miller Lite, so as a surprise for her, I found her a Miller Lite tap handle on EBay.

Today, I put all of this stuff together and mounted the beer tower on the bar top. Mounting the tower made my anatomy shrink up, as once I drilled into the bar top, there would be no going back.

I am pretty damn proud of this. Its not like it was that difficult, but as of a couple weeks ago, I had no clue how a draft system worked. I figured it out, put it together, and now I have cold beer on tap!!!

46533_10152374003085107_908980600_n.jpg


545762_10152374006055107_33799905_n.jpg


534220_10152373969790107_1331919794_n.jpg
 
Nice!
Gotta ask though sounds like you coulda bought a new kegerator and been in better shape haha.
It looks awesome though I'm jealous
 
So um.... the next dtt get together is at your house... right? :) that's awesome man. Simply awesome.
 
Mine

380910_10151051429065361_1715598437_n.jpg



379786_10151004438350361_1387884862_n.jpg


The TO guys should recognise something one the wall.

I do want to get the keg behind the wall and feeding through the tap. I have done alittle more work to the bar since this picture...

464475_10151544154945361_1369918407_o.jpg


This or next week, I want to get my arm bumpers on it.
 
Back
Top Bottom