71 Triumph T100c

Great progress! looks like someone had the best intents at some point.
Now you are making me want to get started on my Beezah ::)
Here is something I have to share that you'll appreciate once you start "tickling" that carb in the mornings.
 

Attachments

  • c482_1.gif
    c482_1.gif
    23.3 KB · Views: 927
Putting the top half bits back together ready for going back on the engine, thoses rockers was a pain
P1010914_zps36a98158.jpg


P1010918_zps710a0deb.jpg


P1010919_zps08144845.jpg


P1010920_zpse9dcc400.jpg


P1010922_zpse5908b3d.jpg

got a busy weekend and then work then xmas so maybe over the hols i may get time to fit them!!!!
Just like to say a massive thanks to Rob at T8 Triumph spares, a ton of knowledge this guy has
 
Thanks man ,ya im well pleased with them, still can't find a good set of pipes though !!!!
 
Nice project Jeff, I'm in!


Not sure if your vapour blasting and our wet blasting are the same thing, but the results look similar if not the same to my 450 head and barrels and I just love that finish. Looks top notch!


Fingers crossed you get a set of those pipes as they're awesome... but you know I'm a sucker for a high pipe right? Haha


I definitely have a soft spot for Trumpy's so very keen to follow along on this one...
 
Ya vapour and wet blasting i think are the same, I get the jugs back on saturday from being rebored +10 so it;s stayed standard for 42 years!! As for the pipes i can get a set made up for around the same price as i would pay anyway but would prefer to get the wright ones but we;ll see what comes along,
Parts for you;r Duc must be even harder to get ???
 
Good stuff! And yep, getting the original real deal pipes would definitely be preferable on a restoration. Authenticity is always good!


So far from what I've seen the Duc parts won't be too bad... but I haven't actually tried to purchase any just yet...
 
So got the barrols back from being rebored and the new pistons +10s very pleased with the work Coltek have done
Now time to put them back !!! before and after shots!!!
P1010859.jpg

P1010923_zpsa0c02c20.jpg

P1010925_zpsdd2dd5c2.jpg

P1010926_zpsb08562b4.jpg

P1010928_zps5683c4ca.jpg

P1010929_zpsde62f904.jpg

P1010927_zps8f3f3b30.jpg

well !! what a change ,Sweet!
 
tappets set, so im happy with the engin so far, now ill start work on the rear section just a clean up ,paint if i have to
P1010932_zps96db66b4.jpg

P1010933_zpsde0b1a42.jpg

P1010934_zps225e2770.jpg

the swing arm and shocks will all come out later too
 
Ya im well pleased with the t100 really nice bike to work on and easy,Lifes easyer now i have my wife (Hil;s) helping out with the build helping out with the prepping bit ready for painting.
P1010970_zpsf6d0e418.jpg

P1010971_zpsec720c2a.jpg

P1010972_zpsbd38e577.jpg


We had such a good day. try it guys
 
I've tried man... I've tried.
She just won't play along.
Maybe I should have her wear a pair of cover-alls instead of insisting she be in a bikini and 4" stelleto's ::)
 
Back
Top Bottom