collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: 75 CB360 - bad omen "yatagarasu" build  (Read 25940 times)

Offline crazypj

  • Posts: 13177
  • Split personality, I fake being smart
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #50 on: Jan 18, 2018, 16:33:19 »
I've only ever used 17/34 sprockets. 37  rear may be too much with extra 22cc. You have already got clutch springs from BorTec?
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 8011
  • You've been mostly-dead all day.
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #51 on: Jan 18, 2018, 16:35:30 »
They shift way too short with the bigger sprocket, too.  At least the 42t.

Offline MiniatureNinja

  • Posts: 468
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #52 on: Jan 18, 2018, 16:58:49 »
I've only ever used 17/34 sprockets. 37  rear may be too much with extra 22cc. You have already got clutch springs from BorTec?

I ordered Barnett clutch springs, BoreTech seams to be going out of business, selling what's left only.
I have a 35, and 34 tooth sprocket already, so I will have the ability to change things up if I need to - 520 conversion BTW
« Last Edit: Jan 18, 2018, 17:12:20 by MiniatureNinja »
'75 Honda CB360 - thread

Offline crazypj

  • Posts: 13177
  • Split personality, I fake being smart
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #53 on: Jan 18, 2018, 23:26:57 »
Cool stuff, I'm doing 520 on 'Blue Bike' to get the extra tyre clearance
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline MiniatureNinja

  • Posts: 468
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #54 on: Jan 20, 2018, 00:52:24 »


pre-cleaning. Anyone got a recommendation for sending heads out for valve seat work and installing new guides? I think the guy I have locally will do it for $250 which I really dont want to have to buy the tools as much as i want to do some things myself, even the installation of guides will require tools I don't have

Since I plan to port the head I think I should also do this BEFORE I get service done, right?
'75 Honda CB360 - thread

Offline MiniatureNinja

  • Posts: 468
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #55 on: Jan 20, 2018, 17:42:18 »


Not sure how to tackle this should I grind these off and how?
'75 Honda CB360 - thread

Offline irk miller

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 8011
  • You've been mostly-dead all day.
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #56 on: Jan 20, 2018, 17:49:01 »
There's a strong argument for keeping the center stand brackets.  You can slide the pin out and remove the center stand for riding, then put it back in when you need to service the bike.  I kept mine.

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 5942
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #57 on: Jan 20, 2018, 17:52:32 »


Not sure how to tackle this should I grind these off and how?

Centerstand clamps.  Absolutely NOT.  Keep them for service, carb tuning, chain adj,  tire work, etc. 
I have my center stand sitting on the shelf.  Stick it on just when needed w a 5/8 x 7" bolt, no spring or nothing.  I don't even bother putting a nut on the bolt.

Offline MiniatureNinja

  • Posts: 468
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #58 on: Jan 20, 2018, 18:11:48 »
bike never had a center stand, will have to find one - I realized it will make some things easier to maintain if I keep the loops and just make it removable like suggested


so what I did was cut off the "stop" and the spring holding loop, then ground the little bump on the bottom off nice and flush so it's a little less noticeable

going to weigh the frame tonight wheni get home - curious how much a stock frame weighs (as in I should have weighed it before I startet cutting and grinding)
'75 Honda CB360 - thread

Offline MiniatureNinja

  • Posts: 468
Re: 75 CB360 - bad omen "yatagarasu" build
« Reply #59 on: Jan 20, 2018, 18:51:21 »
Cool stuff, I'm doing 520 on 'Blue Bike' to get the extra tyre clearance

what size tire? I was able to get about 1mm clearance with a 130 tire on the 360 with stock rear rim.
Not going to do that, 110 rear I think with a 2.15 rim. Not sure yet
'75 Honda CB360 - thread