wowbagger
Been Around the Block
So, I'm making sets of these now and thought I'd throw them up here to see if there was any interest in them. They are a set of four (red, amber, green, blue) 3mm 12V LEDs in chrome or black bezels. No resistors are needed. The black bezels are powder coated with a satin/flat black finish. I suppose I could entertain custom bezel color requests as well.
The plug and play set have all connectors, insulators and needed diodes so that they will plug directly into the stock wire harness on all Honda SOHC bikes. They also come with a set of 8 heat shrink soldering butt connectors since the wires will need to be cut so that the chrome bezel and nut can be properly installed. Once installed just strip a bit of the insulation off both ends, insert them into the solder connector and heat it until it seals.
If you have questions or would like to order a set send me a PM.
Specs:
3 MM 12 volt LED's with white diffused lens
-Each LED is 20ma and uses 0.24Watts
-Viewing angle 140°
-MCD=1000
Bezel fits in a 1/4" pilot hole
12" 20 gauge wire leads
Pricing:
I sell these LEDs a few different ways.
Bare Wire Sets:
$15 - Set of 4 (oil, neutral, high beam and one turn) with 12" bare wire leads
$18.75 - Set of 5 (oil, neutral, high beam and two turns) with 12" bare wire leads
Honda SOHC4 Plug and Play:
$25 - Set of 4 (oil, neutral, high beam and one turn) with 12" wire leads terminated with the correct 3.5mm bullet connectors for the Honda wiring harness
$31.25 - Set of 5 (oil, neutral, high beam and two turns) with 12" wire leads terminated with the correct 3.5mm bullet connectors for the Honda wiring harness
Other mix and match options:
$3.75/LED for the bare wire style
$6.25/LED for SOHC4 plug and play style
Shipping is $4 anywhere in the US. PM me for international shipping prices.
Let me know what you want.
Chrome Bezels:
Black bezels:
SOHC4 Set:
Installed Eye Candy:
Night shot video:
http://www.youtube.com/watch?v=epcjqnE8OoQ#ws
The plug and play set have all connectors, insulators and needed diodes so that they will plug directly into the stock wire harness on all Honda SOHC bikes. They also come with a set of 8 heat shrink soldering butt connectors since the wires will need to be cut so that the chrome bezel and nut can be properly installed. Once installed just strip a bit of the insulation off both ends, insert them into the solder connector and heat it until it seals.
If you have questions or would like to order a set send me a PM.
Specs:
3 MM 12 volt LED's with white diffused lens
-Each LED is 20ma and uses 0.24Watts
-Viewing angle 140°
-MCD=1000
Bezel fits in a 1/4" pilot hole
12" 20 gauge wire leads
Pricing:
I sell these LEDs a few different ways.
Bare Wire Sets:
$15 - Set of 4 (oil, neutral, high beam and one turn) with 12" bare wire leads
$18.75 - Set of 5 (oil, neutral, high beam and two turns) with 12" bare wire leads
Honda SOHC4 Plug and Play:
$25 - Set of 4 (oil, neutral, high beam and one turn) with 12" wire leads terminated with the correct 3.5mm bullet connectors for the Honda wiring harness
$31.25 - Set of 5 (oil, neutral, high beam and two turns) with 12" wire leads terminated with the correct 3.5mm bullet connectors for the Honda wiring harness
Other mix and match options:
$3.75/LED for the bare wire style
$6.25/LED for SOHC4 plug and play style
Shipping is $4 anywhere in the US. PM me for international shipping prices.
Let me know what you want.
Chrome Bezels:
Black bezels:
SOHC4 Set:
Installed Eye Candy:
Night shot video:
http://www.youtube.com/watch?v=epcjqnE8OoQ#ws