Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I dont see why it wouldn't. IIRC the motors are the same but the GPZ had different cams. something else to consider; I have seen guys put Zephyr 750 exhaust systems and carbs on kz650s/kz750s because the port spacing is the same. The Zephyr 550 is based off the old KZ550 motor. I would not be surprised at all if the ports were the same for the zr550/kz550. I have never researched it but it might be worth the trouble for more exhaust options and a nice carb upgrade.
I dont see why it wouldn't. IIRC the motors are the same but the GPZ had different cams. something else to consider; I have seen guys put Zephyr 750 exhaust systems and carbs on kz650s/kz750s because the port spacing is the same. The Zephyr 550 is based off the old KZ550 motor. I would not be surprised at all if the ports were the same for the zr550/kz550. I have never researched it but it might be worth the trouble for more exhaust options and a nice carb upgrade.
Yeah, the exhaust ports should be the same on many of these KZ motors. 650/750 should be the same but I haven't measured the 550's. It would probably be close enough to hammer tweak a 650 pipe on it.
"With mods to the rear hanger plate, any four cylinder kawi 400/500/550 exhaust can be fitted, even later zx unitrack, ZR550 and GT550 shaft Ltd etc...."
I have an old Mac 4 into 1 exhaust for a KZ550 you can have. The headers have some pitting and have a couple of pinholes that need welded up, but it's yours if you want it. I can bring it to the thaw, so no shipping.
I have an old Mac 4 into 1 exhaust for a KZ550 you can have. The headers have some pitting and have a couple of pinholes that need welded up, but it's yours if you want it. I can bring it to the thaw, so no shipping.
Man that would be awesome if you don't mind. The future of this bike is still unsure, could end up in a different form (more on that later) I appreciate it man!
Man that would be awesome if you don't mind. The future of this bike is still unsure, could end up in a different form (more on that later) I appreciate it man!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
