1976 CB750 Into the Sunset

Heat up the bends where the hoop transitions to the top bars (just behind the shock mounts) then bend it down to match the profile of the seat, move the seat back and figure out something else, like a pad that matches the seat, to fill the gap at the tank if there even is one. Looks like the seat goes under the tank, so you could have the room anyway. The other option could be to cut off the back 1" of shock mount and curve the rear hoop from there to get it to match. Heat it up red hot and it bends like licorice.
 
Re: 1976 CB750 Into the Sunset

JustinLonghorn said:
I would need a torch for such an operation.

this should do it. just take your time.
ba898b44368aa9cf6ed5ed2744e5e673.jpg
 
number one. just because everyone else is saying number two, and im a non conformist.






































































but yeah, number two looks better.
 
Back
Top Bottom