doc_rot said:That looks like a good position. Not too far back.
clem said:Are you adding in for seat foam on the KZ height?
redwillissuperman said:Eliminate the heel guard mumbo jumbo and attach to the frame. Done.
If you want a heel guard, go off the tube.
beachcomber said:Hold the front page !!!!!! 8)
My twin plug head conversion has been finished and media blasted .... can't wait ! ;D
BTW - they have a new website www.lonesometwin.com
canyoncarver said:I look forward to seeing that head conversion Beach. I have a login to the new lonesometwins site. I really wished they went with a better forum platform but at least they upgraded and were able to keep alot of content.
doc_rot said:good to know, what is the size of the bore on the MC? im gonna need one for a brake swap soon on my 1000
doc_rot said:sometimes the bore size is stamped in the body of the casting. I am still undecided on the rear caliper i want to use and that will dictate the bore size I need. I think the stock KZ MC is 5/8ths. most newer bikes use small single piston rear calipers and need a much smaller MC. but like you said, try it and see how it works.
clem said:Hey I just got a set from him for the DS7 and they look good. You'll be happy.