shredducus
New Member
Hey guys got a question for ya
Im trying to rebuild this cb200 motor. Everything is going great thanks to the manual, but ran into a little problem with the camshaft. I having a problem trying to loose it to get the cam out to get the head off. I loosened the tensioner, but my manual says to loosen the knock bolts on my cam sprocket. Heres the problem, every time I try to loosen them the cam keeps turning. So, any advice on how to keep the cam from turning or am I missing something. Any help would be appreciated.
(great forum by the way)
Im trying to rebuild this cb200 motor. Everything is going great thanks to the manual, but ran into a little problem with the camshaft. I having a problem trying to loose it to get the cam out to get the head off. I loosened the tensioner, but my manual says to loosen the knock bolts on my cam sprocket. Heres the problem, every time I try to loosen them the cam keeps turning. So, any advice on how to keep the cam from turning or am I missing something. Any help would be appreciated.
(great forum by the way)