Adjustable/Indexable Billet Rearsets

J-Rod10

Over 1,000 Posts
DTT BOTM WINNER
Have them for the 350T, 350F, 360, 500, 500, 750 as complete kits. The kits are $185 + $12 shipping, the 350T and 360 are $195 + shipping, as they have custom pivot pieces I machine for the brake side that allows you to use your stock brake rod, and light switch.


Those prices are for fixed peg. I have folding pegs as well, they are $250 for the kit, $260 for the 350T and 360, $200 for universals.


If you have a bike not listed, I can do custom linkage as well.

Pics of the 350:
IMAG0428_zps3af3c16f.jpg


H350T6_zpse8a7745c.jpg

H350T4_zps76d88d63.jpg

H350T2_zpsac6d85e6.jpg

IMAG0447_zps9327667e.jpg

IMAG0446_zps3f9fc2c7.jpg


On the 350F

IMAG0464_zps1cea3a3c.jpg

IMAG0463_zpseaefad3f.jpg

IMAG0462_zpse8fa7023.jpg

IMAG0461_zps1c41b589.jpg

IMAG0461_zps1c41b589.jpg

IMAG0460_zps9a4f9089.jpg

IMAG0458_zps8d9b9d20.jpg

IMAG0452_zps7372c45d.jpg


On 750K

IMAG0410_zpsc6a17f10.jpg

IMAG0407_zps68ae16fb.jpg

IMAG0405_zpsede2e302.jpg

IMAG0403_zps20ae7bc2.jpg

IMAG0401_zps8575dae3.jpg


On 360

IMAG0522_zps68286df7.jpg

IMAG0521_zps4d4a9a72.jpg

IMAG0520_zps93918be3.jpg

IMAG0519_zps70d6f885.jpg



On 500/550

500_zps6993c016.jpg

H350T7_zpsa654db62.jpg

H350T6_zpse8a7745c.jpg

H350T2_zpsac6d85e6.jpg

IMAG0447_zps9327667e.jpg

5002_zpsaca50edb.jpg



Folding Pegs

IMAG0684_zps37d79b00.jpg

IMAG0683_zps201463ab.jpg

IMAG0682_zps8c1d1f85.jpg

IMG_20131024_194701_zpse453b449.jpg


All sets come with fully knurled pegs. Linkage rods are aluminum as well, with heim joints for the connectors. These rearsets are indexable, and have 2" of adjustability built into the linkage rods to fine tune your toe peg position.

I make each and every one of these, right here in the good ole USA. You may be able to find some that are a bit cheaper, but you will not find any that are better quality.

You can reach me through here, or at jarredholloway88@gmail.com
 
question regarding the 750. do you or anyone else know if theres any point in getting folding rearsets for the 750? specifically, are their other hard parts that would make contact long before the footpegs? (i'll probably run downstairs to check in a bit) just wondering if anyone had first hand experience
 
Not unless you just want them. Engine case will hit the ground before the pegs catch.
 
thanks for the response, bike is starting to get assembled, if the riding position works out without the brake lever hitting my exhaust. i'll be in for a set.
 
All sets either have been shipped or will be today/tomorrow.


I have several more sets ready.
 
IMAG1157_zps49f702fd.jpg



Solid ice out here today.

If I don't get the sets out to the guys still waiting tomorrow, I'm going to start refunding shipping costs.
 
Unfortunately, I do not have one to pattern off of.

What we have done in the past, on bikes like that, is sent out the pegs and levers, let the customer set them up, and give us a measurement for linkage, and I build the linkage that day and send it out.
 
Back
Top Bottom