japstar
Been Around the Block
I encoutered slightly corroded jets in my bike. (green like corrosion on brass parts).
I used jet reamers to clean out those holes. Do that by reaming the holes till you stop finding green residue on your reamers, than you've hit the stock size. Make sure your carb cleaner squirts out of all corresponding holes when spraying down a passage. (clean spray, not dripping)
I used jet reamers to clean out those holes. Do that by reaming the holes till you stop finding green residue on your reamers, than you've hit the stock size. Make sure your carb cleaner squirts out of all corresponding holes when spraying down a passage. (clean spray, not dripping)