Cj360 idle mixture screw

Rene Holsebro

Been Around the Block
Hi guys
Just received a oring set for my cj360 in the set are
Idle Mixture Needle O-Ring (x2)
But I only have one in one of the carbs. Should there be one in both carbs
 

Attachments

  • 07FC6616-6E30-46DD-A264-DEFA350BA76E.jpeg
    07FC6616-6E30-46DD-A264-DEFA350BA76E.jpeg
    356.8 KB · Views: 179
  • 925C99F5-800E-44B4-8A4E-7CC08940BE33.jpeg
    925C99F5-800E-44B4-8A4E-7CC08940BE33.jpeg
    611.2 KB · Views: 171
It will be facing the outside on either carb. When they cast the carbs, both sides have a boss for the A/F mixture screw but they only drill 1 side depending on if its for the left or right cylinder.

You can actually see the mixture screw on the far side of the carburetor in your first photo.
 
Back
Top Bottom