Well, I learned a lesson today. Kemso fuel pumps kinda suck. I had tested it and all was good, but when trying to crank the bike I wasn't getting fuel pressure. So pulled out the multi-meter and checked that there was voltage getting to it. I knew the relay was coming on because the coils are run by the same one. Had voltage, so I pulled the tank and removed the pump. connected it straight to a battery and nothing. So now I am waiting on a quantum pump that should be here today. But In good news I have the timing dialed in at a fixed 10*, meaning I can switch over to the spark table and should be good. And yes, I checked timing on both cylinders since it is a rephase to make sure I have the oddfire setting right.