Single Cylinder Ironhead Sportster

I think I'm going to run a suck through set up with a hsr42 flat slide Mikuni. That way I won't have to modify the floats for a high boost set up. It will also help atomization of the fuel.

Here is the Mikuni
 

Attachments

  • image.jpg
    image.jpg
    2.6 MB · Views: 410
  • image.jpg
    image.jpg
    2.7 MB · Views: 418
Here is everything mocked up into a shovel head frame
 

Attachments

  • image.jpg
    image.jpg
    2.5 MB · Views: 419
  • image.jpg
    image.jpg
    2.5 MB · Views: 416
  • image.jpg
    image.jpg
    2.2 MB · Views: 391
now add a powerjet to the hsr that is boost controlled for fuel flow on off
 
Sorry for the lack of posts. life took a turn for crazy and I had to put this project on the shelf. However I recently pulled everything from the depths of storage and tossed it all on a table to start tossing ideas around.
 

Attachments

  • image.jpg
    image.jpg
    3.4 MB · Views: 343
  • image.jpg
    image.jpg
    1.6 MB · Views: 343
cool man ..that 30mm front fork lashup wont fly for a 500 though. they were inadequite on the 175 they came off of
 
Back
Top Bottom