sbelshe
Been Around the Block
Engine rebuilt on my CB360 project. While trying to test fire, I noticed the electric start only generated a really slow crank. So I tried manually kicking it to see if the cam was tight, but the kick felt normal and the bike fired.
- Battery is new, it's not even a standard bike battery, it's a bench test battery, a car battery at that.
- I jumped the solenoid and same result
- I tried multiple ground points
- I've tried 2 different starters, same issue
Any other ideas or anyone seen this before? I read a bit about the potential for quality wire issues. I'm using new 8AWG copper, I've used it on other bikes, including 360's with no issues.
Thanks
- Battery is new, it's not even a standard bike battery, it's a bench test battery, a car battery at that.
- I jumped the solenoid and same result
- I tried multiple ground points
- I've tried 2 different starters, same issue
Any other ideas or anyone seen this before? I read a bit about the potential for quality wire issues. I'm using new 8AWG copper, I've used it on other bikes, including 360's with no issues.
Thanks