so my goal is to build a simplistic looking SR250, inspired by SR250 Mexico / Rachel and aim to keep it under $2500. I choose SR250 cause its a fairly simple motorcycle and i dont know much about motorcycles at all. So i figured it would be a great learning experience. And every project bike needs a name right so this one is called 'Rani'
Since i dont know anything about motorcycles my aim was to buy a motorcycle that was well kept and that wouldnt give me any engine problems. I found one for just under $1k - only 2nd Owner, very few miles, very well kept IMO.
Right away i am running into challenges so i figured i would start asking questions and help. I also hope to provide as much information as possible for the next person like me or for anyone looking for any source of reference
So far this is what i have done :
I want to paint the tank but the cheapest quote i can get was $300 so painting the paint is depriortized for now or i might take that on myself.
I bought new tires going to try to fit 130/90/16 in Rear and 100/90/18 in front (default is 120/90/16 , 90/90/18) , new tubes, and rim strips ofcourse - Total $250
New Antigravity 4-cell battery - $105
I changed the handle bar to an existing one that i had lying around - no cost
K&N RC-2340 Air filter - Not sure if this is going to fit, i have read you need a 55mm, (hasnt arrived yet) - $50 (amazon)
Turn Signals and Brake light - $50 (from ebay)
Round Odometer and tach to be purchased from DCC (around $100, havent purchased yet)
Next Challenges/Questions -
What to do with the seat ? - i absolutely hate the seat but cant find a good replacement either that will not require me to make some mods. I am going to call around and see if anyone can upholster the current seat and just make it flat-er (estimate around $250, i think)
Does anyone know what type of K&N crankshaft breather i need to buy ? i think its K&N 62-1030 but not sure
To keep the fenders as is, remove or shorten them? i want to shorten them but not sure how good a job i will be able to do with an angle grinder myself. Any tips ?
Anyways here are some pics - Day 1 when bike bought -
So far i have changed the handlebars and removed the chrome around the seat. Total Spent so far $1600 (approx)
Since i dont know anything about motorcycles my aim was to buy a motorcycle that was well kept and that wouldnt give me any engine problems. I found one for just under $1k - only 2nd Owner, very few miles, very well kept IMO.
Right away i am running into challenges so i figured i would start asking questions and help. I also hope to provide as much information as possible for the next person like me or for anyone looking for any source of reference
So far this is what i have done :
I want to paint the tank but the cheapest quote i can get was $300 so painting the paint is depriortized for now or i might take that on myself.
I bought new tires going to try to fit 130/90/16 in Rear and 100/90/18 in front (default is 120/90/16 , 90/90/18) , new tubes, and rim strips ofcourse - Total $250
New Antigravity 4-cell battery - $105
I changed the handle bar to an existing one that i had lying around - no cost
K&N RC-2340 Air filter - Not sure if this is going to fit, i have read you need a 55mm, (hasnt arrived yet) - $50 (amazon)
Turn Signals and Brake light - $50 (from ebay)
Round Odometer and tach to be purchased from DCC (around $100, havent purchased yet)
Next Challenges/Questions -
What to do with the seat ? - i absolutely hate the seat but cant find a good replacement either that will not require me to make some mods. I am going to call around and see if anyone can upholster the current seat and just make it flat-er (estimate around $250, i think)
Does anyone know what type of K&N crankshaft breather i need to buy ? i think its K&N 62-1030 but not sure
To keep the fenders as is, remove or shorten them? i want to shorten them but not sure how good a job i will be able to do with an angle grinder myself. Any tips ?
Anyways here are some pics - Day 1 when bike bought -
So far i have changed the handlebars and removed the chrome around the seat. Total Spent so far $1600 (approx)