CB360 sparck moto regulator rectifier

oathamm

Active Member
Hi
I'm going to build a battery tray under my brat style seat for my cb360 build. I will run the sparck moto reg/rec unit, now can I put this in the enclosed battery tray or will the unit get to hot with no air flow? Should I mount in direct airflow to keep it cool or provide some ventilation and house in my battery tray?
Thanks
 
Yes, you should mount the reg/rec where air flow can cool it if possible. You don't HAVE to, but you should.
 
I built my electronics box with perforated sheet metal for added air flow

Sent from my Nexus 7 using Tapatalk
 
Under mount:

Bottom side

e723c3c2e6b057449fc4ceac553cd791.jpg


Top side
8cc2398ddab6277673cf0639ff9078fc.jpg
 
Back
Top Bottom