VintageMBike
Been Around the Block
I have a 1981 Honda CB 900F. Someone told me CBR600F3 coils from and older bike are a good upgrade. I found them on ebay.
In testing them, then I test from the NON spark plug side I get a reading of 3.7 at 200 ohms. But when I stick the positive and negative leads in the Spark plug boot coming from the coil, I dont get ANYTHING until i bump the multimeter up to 200K ohms at which point the reading is 25.6. But if I move the ohms selector down on the multimeter to 200oms instead of 200k ohms I get 1 .
Is this coil any good?
In testing them, then I test from the NON spark plug side I get a reading of 3.7 at 200 ohms. But when I stick the positive and negative leads in the Spark plug boot coming from the coil, I dont get ANYTHING until i bump the multimeter up to 200K ohms at which point the reading is 25.6. But if I move the ohms selector down on the multimeter to 200oms instead of 200k ohms I get 1 .
Is this coil any good?