cafecustom720
Been Around the Block
That seat looks sweet.
dcbryan said:Oh my bad! It was a XL175 I pulled the front end from. The forks looked just like these - http://www.dirtbikerider.us/Pics17/20060604-1149416042399-1974-Honda-XL175.jpg'
dcbryan said:Hey guys, now that I've got that engine back together and back in the frame, I've finally had time to hook up some wiring and see if it'll start. After some trouble shooting I figured out I was blowing fuses every time I turned the key. Any ideas on where to look for the short?
Thanks for the help.
Big Rich said:start off by unplugging everything you can - but if there's a short somewhere that might not stop it. Do you have the entire bike wired up, or just the ignition? Most likely you have a positive wire/connection grounding out.
Big Rich said:Do you have a multimeter and a wiring diagram? If so, check all the positive wires for continuity to the negative post on the battery. Shouldn't have any.......