Cb250 wheels on a Cb350F?

G'day guys,

So I picked up a front end (trees, forks) and a front and rear rim from a mates old '80 model Cb250 twin.

Fitted them up to my Cb350f frame last night, seemed to bolt up okay with the exception of the rear axle which is too long.

Has anyone tried this before ? The reason I ask is that it all seemed too easy. I have the front disc rim and rear drum.

Planning on putting the Cb400F engine into the frame. Is it going to end up under braked and under sprung in the front end?

Any help is much appreciated.

(they're 33mm forks)


---
I am here: http://tapatalk.com/map.php?e52zyl
Cheers,
________________
Dan - OLDN64
Perth, Australia.

Honda tend to use pretty stock sized bearings, the swing arm on late model 250 is box section which is why axle is too long
Fit stock 350 axle and chek wheels are centered, it probably is 'too easy' ;D