Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Thanks it's a m10 to 4AN fitting purchased from "xaturbo" on ebay. line is a 24" 10mm banjo to 4AN . You will want it a few inches longer if you have not lowered the front end.
This is the closest I can find looking now, but it's in China.
http://www.ebay.com/itm/AN4-4AN-JIC-STRAIGHT-MALE-FLARE-to-M10-x-1-25-METRIC-ALUMINIUM-FITTING-ADAPTER-/141196944652?hash=item20dffe650c&vxp=mtr
I've ordered a magnaflow 12" exhaust tip as well. It is not a megaphone like I wanted but a straight extension and it should help it look more finished. Will use a stainless v-band clamp to hold it at the head pipe.
I missed it last year for a wedding. I was there the previous year but the bike was "finished" to a much different level then! Was there another this year? I must have missed it.
Installed the exhaust tip. It's a weld on type but I made 4 slits at the base and was able to clamp it on with a stainless v band clamp. Worked out nice and has a megaphone-ish look. After my last ride the front brake is sticking so I've ordered a new seal and set of pads and will take it apart once those items arrive.
Thanks y'all. The rearset brackets were rear foot peg mounts from a vt750 then mounted on the frame with chrome 1 1/8" frame clamps. Rearsets are old school speed.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.