CALfeRacer
Fat man on a little bike
Stock pegs are for sure. Don't want to mess with rearsets (that's for the RD). I'm thinking about shaving the foam on the stock seat, since the top layer is pretty crusty anyways.
CALfeRacer said:Stock pegs are for sure. Don't want to mess with rearsets (that's for the RD). I'm thinking about shaving the foam on the stock seat, since the top layer is pretty crusty anyways.
I was just concerned that it might not be big enough.DohcBikes said:Parts in hand? Sounds like a good place to start
I've seen a few of those. Wasn't sure about the qualityBrodie said:If you are after a new one check out OKO carbs. The should have what you need.
Decent if you get a genuine OKO. Surprisingly there are knockoffs.CALfeRacer said:I've seen a few of those. Wasn't sure about the quality
trek97 said:I popped it open, sprayed a little penetrant on the do-hickies, gave things in there a few flicks.
Raciest thread going.CALfeRacer said:How'd you go about popping it open?
DohcBikes said:Raciest thread going.
trek97 said:The speedo on my 72 CL100 was stuck. (sat in a shed since 1978) Wouldnt work w new cable. Had nothing to loose. Except the $ for a new one. So, I popped it open, sprayed a little penetrant on the do-hickies, gave things in there a few flicks. Been working great ever since.