collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: modified, aftermarket, or custom. nothing is safe (78 KZ1000)  (Read 50321 times)

Offline der_nanno

  • Posts: 359
  • Faster!
    • Greasy Greg
Re: modified, aftermarket, or custom. nothing is safe (78 KZ1000)
« Reply #340 on: May 10, 2018, 10:00:51 »
Making a turbo kit yourself on these bikes is dead easy as long as you get yourself a carbon sealed turbo. Make sure you get a carbon sealed GT25 or GT28 with a ballbearing and even the low oilpressure shouldn't be much of an issue. For the oil-feed you can use the check plug behind the cylinder with a restrictor.

If you want to save yourself a lot of headache go for the biggest Mikuni flatslide you can find, which currently I think is a HSR48 and have a look at classic Mr. Turbo and ATP kits. Instead of the 70ies-style flat flanges, I'd do some V-band flanges instead as they seal nicer and align better.

You'll get away with up to around 7 or 8PSI on standard compression ratios and stock pistons. (Nothing fancy in that respect on my Turbo TR1, I can assure you!) If you want to go higher, turbo pistons and lowered compression are a must. Even though you might be able to sneak in the odd PSI by running a boost retarded ignition and water-meth injection, but really you're living on the edge by then and one thing going wrong basically means boom.
« Last Edit: May 10, 2018, 10:02:41 by der_nanno »
Real freedom starts with the freedom of thought.

My Blog:
http://greasygreg.blogspot.co.at

My Mule TR1.1 build here on DTT:
http://www.dotheton.com/forum/index.php?topic=75458.0

My Turbo TR1.1 (XV1000) build here on DTT:
http://www.dotheton.com/forum/index.php?topic=72571

My XS Triple Sidecar build here on DTT:
http://www.dotheton.com/forum/index.php?topic=74211