collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: 1970 Triumph Tiger 650  (Read 28364 times)

Offline xb33bsa

  • Posts: 7726
Re: 1970 Triumph Tiger 650
« Reply #20 on: Jan 26, 2016, 23:22:37 »
m8 bolts would plenty for that, but to make it trick looking and to accomodate 2 welds relieve the center section 1/2" or so,away from the slider so that the bracket plants down on the slider just like 2 tabs would thirds would be perfect 1" down 1" away 1" down for example on a 3" length

Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #21 on: Jan 27, 2016, 12:20:13 »
m8 bolts would plenty for that, but to make it trick looking and to accomodate 2 welds relieve the center section 1/2" or so,away from the slider so that the bracket plants down on the slider just like 2 tabs would thirds would be perfect 1" down 1" away 1" down for example on a 3" length
The caliper bracket itself has M10-1.25 threads in it. I have allen head bolts ordered to replace the big hex heads. I like the welding idea.

Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #22 on: Jan 28, 2016, 18:18:39 »
Scored today when a buddy dropped by with some parts for his W650 that he wanted powder coated. Had about $65 worth and paid me with a brand new pair of EMGO Triumph 650 mufflers worth $200. He had bought them for his W650 but they didn't work the way he wanted so he put them on the shelf collecting dust for years.

Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #23 on: Jan 30, 2016, 12:51:16 »
Powder coated the fender hardware in Matte Black, as well as the seal holders. Coated the fender in a gloss black and masked off the center stripe in prep for the new Spring Gold paint (Jeep Rescue Green).
« Last Edit: Feb 01, 2016, 01:58:37 by o1marc »

Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #24 on: Feb 03, 2016, 01:32:01 »

Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #25 on: Feb 03, 2016, 13:11:41 »
Bracket for the brake splitter completed.


Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #26 on: Feb 04, 2016, 18:59:37 »
Ran a sample coat of the Jeep Rescue Green on the fender, it's a close enough match to the original Spring Gold that I will use it. It has 7 different colors and flakes in this green. You can se the red and blue and gold flake in the sunlight. This was done with a rattle can.







Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #27 on: Feb 13, 2016, 21:03:17 »
Front end complete:

« Last Edit: Feb 13, 2016, 21:06:15 by o1marc »

Offline o1marc

  • Posts: 2242
    • Creative Candy Powder Coating
Re: 1970 Triumph Tiger 650
« Reply #28 on: Feb 15, 2016, 01:03:06 »
Powder coated the cylinders Matte Black:










Offline Brodie

  • DTT SUPPORTER
  • *
  • Posts: 2276
  • Gold Coast, Queensland
Re: 1970 Triumph Tiger 650
« Reply #29 on: Feb 15, 2016, 02:00:45 »
Looks good.
I'm not sure, but don't ask Brodie.

Way to many build and half done projects to list here.
Sr250, Gs750, Z50A, XV1100, A10, Z160A.