jeffcampagna
New Member
Hey folks. I'm struggling with the stock fork ears on my 73 CL350. The stock upper triple was cracked so I spent the coin (wife was not happy) on a wicked black anodized upper triple and risers from Cognito Moto.
The new triple is pretty much the same height as the stock triple, but for some reason, after replacing it, I've got this annoying gap between the top of the chrome fork ear and the bottom of the triple. As you can see, and as is always the case with the early 70s Honda fork ears, the fork tube beneath is rusted like crazy.
How do I close this gap again? I've played with the fork tubes etc... but can't seem to right it.
As always, any help or suggestions would be appreciated.
The new triple is pretty much the same height as the stock triple, but for some reason, after replacing it, I've got this annoying gap between the top of the chrome fork ear and the bottom of the triple. As you can see, and as is always the case with the early 70s Honda fork ears, the fork tube beneath is rusted like crazy.
How do I close this gap again? I've played with the fork tubes etc... but can't seem to right it.
As always, any help or suggestions would be appreciated.