Motorcycle Bench

eklimek

New Member

• Nov 30, 2013

• #21

Ramps, we don't need no ramps....

 

Attachments

• 
  image.jpg

  776.6 KB · Views: 621

eklimek

New Member

• Nov 30, 2013

• #22

But we need to decorate.

 

Attachments

• 
  image.jpg

  806.2 KB · Views: 692

andycafe

Northern Suburbs, Melbourne Victoria, Australia

• Dec 1, 2013

• #23

eklimek said:

Ramps, we don't need no ramps....

Click to expand...

;D must be fun when you go to wrench and it swings away from you ;D

 

W

wagonmaster69

Been Around the Block

• May 27, 2014

• #24

Here's mine.
Bought the bench for $20 then the wheel chuck for $25 and an other $45 or so on extra wood casters D-rings and screws.
I modified it so I can get my HF lift so I can use a small ramp role the bike up strap it down and lift the table up and role the legs in place and lower.

 

Attachments

• 
  IMG_0963.JPG

  852.4 KB · Views: 703
• 
  IMG_0964.JPG

  1.1 MB · Views: 608
• 
  IMG_0965.JPG

  1.1 MB · Views: 683
• 
  IMG_0966.JPG

  753.9 KB · Views: 656
• 
  IMG_0967.JPG

  875.2 KB · Views: 614
• 
  IMG_0962.JPG

  895.3 KB · Views: 636

Killman77

当有疑问时踢你的敌人在生殖器上，你可以道歉后

• May 27, 2014

• #25

That's pretty frickin' ingenious Wagonmaster. Well done!

You've given me ideas...

 

W

wagonmaster69

Been Around the Block

• May 27, 2014

• #26

Thanks Killman77.

 

lsrcb175

New Member

• May 27, 2014

• #27

Same concept as others, I also use HF chain falls to get bike on stand.

 

B

Bobbed_out

Been Around the Block

• Jun 1, 2014

• #28

I made this out of leftover scrap ply and 2x4s from work. Only thing I had to buy was the casters and the hf wheel chock. I moved in with my dad for a couple months when I broke up with my ex...so I had some free time and found some random paint in my pops workshop and got creative!

 

lbaker

Active Member

• Jun 5, 2014

• #29

Some great bench ideas!

 

G

govee

New Member

• Jun 9, 2014

• #30

Here is my DIY attempt (plans for it were found on the internet).

 

andycafe

Northern Suburbs, Melbourne Victoria, Australia

• Jun 10, 2014

• #31

Wow, now that's impressive 8)

 

DannyD

New Member

• Oct 15, 2014

• #32

Here is my attempt made out of an old bedhead and frame...so now my old workbench is my new workbench... ;D

 

Attachments

• 
  IMAG0069.jpg

  1.3 MB · Views: 334

wowbagger

Been Around the Block

• Dec 2, 2014

• #33

govee said:

Here is my DIY attempt (plans for it were found on the internet).

Click to expand...

I think these are the plans govee used: https://dl.dropboxusercontent.com/u/2560129/Motorcycle%20Lift%20assembly%20plans.pdf