Hand Controls that will fit clubman bars

jdseibe

Get to the Choppa!?
Hi All,

I have an 1979 Yamaha XS750 Standard that I am turning into a Cafe Racer, I sold the stock hand controls for cheap (they were kinda junky) and am now looking to get a more up to date looking set of hand controls (something a little more comfortable to use)..

I need hand controls that include:

starter button | Run/kill button
horn | hi/lo beams | turn signals | choke (if possible)

also need the hand lever assemblys for the clutch and brakes (need reservoir) must include clutch safety switch and brake light switch.

I will be installing these onto a set of clubman drop bars (which if anyone has this whole set for sale that would be even better)

thanks
 
Nobody has any hand controls at all? I find that hard to believe?'

it doesn't have to be anything specific, Ill make it work, as long as they look nice.
 
I bought some from http://www.ozgpowersports.com/ They are small, cheap and light. Cleans up you bars nice. I got the left and right and got rid of my non working cb550 clunkers.
 

Attachments

  • 281556746_o.jpg
    281556746_o.jpg
    35.5 KB · Views: 220
  • 317405171_o.jpg
    317405171_o.jpg
    48.5 KB · Views: 187
i have a cb550 f, and i noticed that on the site it does not list that bike as an option for those controls. can you fill in me in on what you had to do to get them to work?
 
They acutally fit right into the stock harness. See Inst below. Just match up to your wire diagram-
Dual sport LEFT side universal switch wiring details:
Gray: Turn signals +
Light blue: Right turn signal
Orange: Left turn signal
Light green & dark green: Horn switch
Blue with white stripe: Headlight +
Dark blue: High beam
White: Low beam
Dual sport RIGHT side universal switch wiring details:
Black: +
Brown with white stripe: park lights
Blue with white stripe: headlight
Brown: running lights (Turns on with both park lights and head light)
Yellow with red stripe: Start button
Orange: Engine switch +
Gray: Engine on

Blue: Engine on
 

Attachments

  • 281556782_o.jpg
    281556782_o.jpg
    44 KB · Views: 271
  • honda-cb550-wiring-diagram-restoration.jpg
    honda-cb550-wiring-diagram-restoration.jpg
    196.8 KB · Views: 583
SOLD.........unless anyone knows of a better/cheaper solution?


I will buy on sunday so I have something to look forward to next weekend, lol.
 
purchased. they look great.


Hey, there is no hole for a throttle close cable. anyone else find that weird?


also, I have the left hand control working fine, but cannot sort out the right. there is no labeled image for the right like there is for the left. Also, I cannot make sense of the wiring diagram. Any ideas? Can you help me out? Maybe take a photos of your connectors or let me what colour "male" from the control matches what colour "female" in the harness? I have been at it for about 2 hours and cannot get it to work right. I also have more female connectors than male :-\



any help would be great.


thanks
 
I'll take a photo of my set up later. I took me a while to figure it out. Thx for the carbs
 
haha, did not even realize you were the same guy I sent the carbs to. lol.


Awesome. I look forward to the photo so I can get this sorted out.......
 
Back
Top Bottom