Thoughts on HF blast cabinet vs. TSC cabinet?

SONICJK said:
Thanks,
And I know! I just have to find a place up there willing to stock some of it! (Any ideas?)

I used to work down on Wall Street and there are a ton of High End Boutique shops in the Greenwich Village and tribeca area. Let me see if I can find out a few names.

Alot of my old traders live down in that area. Them spending $10k on a couch is nothing lol
 
Actually I paid nothing for the 5hp Single Phase motor because I sold the 3 Hp 3 Phase motor on ebay that came on the compressor for more than the 5 hp cost lol
 
Ya it takes a lot of air to sandblast (picture shows how much based on nozzle size) if you want better results also consider a media reclaimer with your dust collector as this will clean the media and let you blast more efficiently (keep media from becoming to small) you can consider a low cost collector like those from Cyclone manufacturing. More on
blast cabinet quality differences here
 

Attachments

  • SKMBT_C28417070515160.pdf
    347.4 KB · Views: 271
Way to pull up a 4 year old thread haha.

It's funny looking back 4 years,my compressor has now tripled in size and has a 900 gallon tank lolol
 
FYI
To anyone who comes across this thread in another 4 years.

I just bought a used HF blast cabinet and I used it with some glass media using my old 5 hp 120v compressor and it worked really well. I did a lot of small parts and 1 mag wheel. I took a few breaks when doing the wheel as it got dusty and hard to see, but that was because the breaker kept tripping when running the compressors and a shop vac at the same time.

1920caf8493502cf8b24b954fd2180bb.jpg


7bbd0fc7d6093ddbdf0f6bdf6a3a707e.jpg


df1c99b4fd791cd947652d612a486119.jpg


30e575efcde9f3b9358822aae419effc.jpg




Sent from my iPad using DO THE TON
 
Back
Top Bottom