Bell Moto 4 re-do **DONE**

billyp

Been Around the Block
Picked it up on ebay for cheap, good condition just a little dirty. Took the insides out and threw them in the washing machine, cleaned up nice. Got some new rubber edging and a couple other new bits. Slipped the foam out, stripped it down the rest of the way and got it ready for paint.

Roughed it up, put a couple coats of high build sandable primer, wet sand with 400 then sprayed the silver base and masked the stripes and number.

helmet2_zpsxxjouqrm.jpg


helmet1_zps2uhca9gx.jpg


helmet4_zpsqrninu4y.jpg


helmet5_zpspznlvoq2.jpg


helmet3_zpssjm39yvu.jpg


Then sprayed the final coats of blue

helmet7_zpswabpjpa1.jpg


helmet6_zps3am8allk.jpg


I'll pull the tape, let it dry for a few then "vintage" it up. More pics to follow
 
Re: Bell Moto 4 re-do

Cool stuff man! That will be neat!
 
Back
Top Bottom