hurco550 said:So tune, you ARE running an internal throttle right?
teazer said:Looks cool, but the weight is cantilevered out a long way and between weight trying to bend the studs and vibration, the coil mount would benefit from a redesign. Maybe add a simple triangulation below the studs or better still: hang the coil, down rather than have it hanging forward. Is there a place that would work?
Perhaps a flanged bracket with weld nuts.
BTW, are those "handed" monoblocs? they were rare enough back in the day and look great on that motor.
Tubing over the threaded rod with tension from the nut will do just fine, too. It's not like it's 100lbs or anything.Tune-A-Fish said:Ahh man no confidence : The coil will get a pillow bracket underside with a nice soft rubbery cushion.
Allow me to illustrate ??? The speed holes may cause some harmonics disrupting my FM radio signal to my Zune tho :-\
Handed and sequenced
deviant said:Tubing over the threaded rod with tension from the nut will do just fine, too. It's not like it's 100lbs or anything.
Tune-A-Fish said:Ahh man no confidence : The coil will get a pillow bracket underside with a nice soft rubbery cushion.
Allow me to illustrate ??? The speed holes may cause some harmonics disrupting my FM radio signal to my Zune tho :-\
Handed and sequenced
Tune-A-Fish said:I need this deadlight... and another BSA to build one of these cafe ish BSA bombers
VonYinzer said:I have the Yamaha mags you'll need...
teazer said:Be careful with those holes though. Natural resonance may create RF frequencies in the UFO range and it would be unfortunate if your bike started calling aliens.
Tune-A-Fish© said: