Darkness 78 CB750

Mocked up the rear hoop today. There are sleeves added inside for strength. The suspension mounts will get re-enforced later. Also mocked up an electrics tray and side shields out of cardboard in case they need modifications as the build progresses. I am relocating the oil tank behind the air filter so that's next to come

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1458535532498.jpg
    uploadfromtaptalk1458535532498.jpg
    68.6 KB · Views: 414
Let me know what you think

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1458537999614.jpg
    uploadfromtaptalk1458537999614.jpg
    62.2 KB · Views: 1,599
  • uploadfromtaptalk1458538013373.jpg
    uploadfromtaptalk1458538013373.jpg
    87.1 KB · Views: 445
  • uploadfromtaptalk1458538025627.jpg
    uploadfromtaptalk1458538025627.jpg
    67 KB · Views: 437
  • uploadfromtaptalk1458538035735.jpg
    uploadfromtaptalk1458538035735.jpg
    82.6 KB · Views: 416
So I finally received the lead kit to fill the tank emblems. I prepped the tank yesterday by sanding and roughing up the surface to accept the filler

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1459470381724.jpg
    uploadfromtaptalk1459470381724.jpg
    48 KB · Views: 413
Left and right side after the initial filling

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1459470557394.jpg
    uploadfromtaptalk1459470557394.jpg
    43.3 KB · Views: 418
  • uploadfromtaptalk1459470565182.jpg
    uploadfromtaptalk1459470565182.jpg
    43.3 KB · Views: 426
Finished product. After about an hour filing and sanding. There are a few low spots but overall not to bad for first try. I'm very happy with the end result and all that's needed is a bit of bondo and sculpting when she's ready for paint

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1459470924935.jpg
    uploadfromtaptalk1459470924935.jpg
    81.3 KB · Views: 430
  • uploadfromtaptalk1459470728715.jpg
    uploadfromtaptalk1459470728715.jpg
    80.4 KB · Views: 436
I'm digging it man, that tank filler worked great. Inspiration bike looks amazing too, looks like it even has tire clearance built into the seat. Just about perfect in my book, though I do prefer fenders to none.
 
Thanks coyote. Not sure if I'll run fenders, I'm leaning more towards a splash guard between the frame rails, maybe a speed hole design on bent sheet metal

Sent from my XT1254 using Tapatalk
 
Hutch08 said:
Thanks coyote. Not sure if I'll run fenders, I'm leaning more towards a splash guard between the frame rails, maybe a speed hole design on bent sheet metal

Sent from my XT1254 using Tapatalk

You're very good at this. Duly impressed! Bike looks great thus far.
 
Thank you Double. Im good at mechanics as a crew chief for the air force but bikes are new to me so I do my best to relate

Sent from my XT1254 using Tapatalk
 
Hutch08 said:
Thank you Double. Im good at mechanics as a crew chief for the air force but bikes are new to me so I do my best to relate

Sent from my XT1254 using Tapatalk

My dad was in the air force. Good man!!!
 
Sounds like an interesting career. Im work with pilots every day and there is always a good story to hear

Sent from my XT1254 using Tapatalk
 
So I'm a little pissed right now. Just took off my shifter cover and discovered a chunk missing from the bottom. Not sure how easy those are to locate and replace. Mad I didn't see it earlier.. Ugh

Sent from my XT1254 using Tapatalk
 
Wha-bam!

http://www.ebay.com/itm/1975-honda-cb750-cb-750-ss-f-sohc-h106-shifter-cover-/250676673233?hash=item3a5d7e7ad1:m:mxH9L9aRK6ovhil_pZxSdGg&vxp=mtr
 
Waiting on parts to arrive. Figured I would design the tank logo
23eba3312030f8743829e2327576ff44.jpg


Sent from my XT1254 using Tapatalk
 
Oil tank arrived yesterday from CognitoMoto and installed it last night. This tank is awesome, very heavy duty and is well made. I did have to remove two more tabs that interfered with the top of the new tank where the old tank had its mounts. The hoses were a bit of a challenge but some heat and grease helped. I am not going to keep the rubber frame fasteners but instead weld some metal tabs for a clean flush look

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1460837951470.jpg
    uploadfromtaptalk1460837951470.jpg
    60 KB · Views: 1,339
  • uploadfromtaptalk1460837965236.jpg
    uploadfromtaptalk1460837965236.jpg
    101.8 KB · Views: 433
  • uploadfromtaptalk1460837972194.jpg
    uploadfromtaptalk1460837972194.jpg
    93.9 KB · Views: 425
Fixed the dents and dings on both sides of the tank. Almost ready for primer and paint. The lead fill worked great and only took a little body glaze to fill some pinholes

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1462580031626.jpg
    uploadfromtaptalk1462580031626.jpg
    56.1 KB · Views: 407
  • uploadfromtaptalk1462580036840.jpg
    uploadfromtaptalk1462580036840.jpg
    52.7 KB · Views: 411
Next up is some tank lining

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1462580197596.jpg
    uploadfromtaptalk1462580197596.jpg
    57.3 KB · Views: 390
Chopped the center frame to make more room for the electrics tray and battery. Fit a 1" pipe for re-stability.

Sent from my XT1254 using Tapatalk
 

Attachments

  • uploadfromtaptalk1462580266683.jpg
    uploadfromtaptalk1462580266683.jpg
    64.4 KB · Views: 411
Back
Top Bottom