tied up a bunch of loose ends today.
Sprayed the flox on the turn signals black and mounted the cap.
My neutral safety light came out while doing some wiring, so I floxed that in. wont move again.
Sanded down the seat where resin dripped, then sprayed it semi-gloss black.
One of the head pipe flanges was dented. I guess I did it at some point. I tried to tap it flat, then i put some copper RTV on the mounting flange in the head. should be fine (I hope).
Exhaust baffles came in today. crazypj said they were probably too restrictive, so I bent the tabs to allow some more flow.
I routed the fuel lines from the tank to the carb today. Threw some inline stone filters in there. I broke the stock fuel screen when I got the tank, so right now I'm technically running on reserve and dont have an in-tank screen. I just coated the tank, so I think I should be ok until I can get my hands on one.
Cut up the seat pad from the last seat/tail I had. Looks like hell but I'm going to wait until I absolutely hate it before I change it. For now, its functional.
Since I only got one member's opinion on the tank, I guess I'm going to leave it for now. a friend of mine said it looks bad ass all beat up, so thats the other opinion i got.
My wiring genius friend said he would stop over tonight and finish everything up. he just needs to do the rear lights and the hidden kill switch. After that I'm going to fill it with gas and take it for a spin.