How to attach speedo magnet to wheel / rotor??

-Jeremy-

New Member
Does anyone have a good way to attach the small, loose magnet to the wheel, for an after market speedo?

For example, I bought the motogadget mini gauge. It has a small wire with a sensor at the end, which will be attached low on the fork or somewhere near, then a very small magnet that passes by the sensor which needs to be attached to the wheel (probably the inner, non-used part of the rotor because of the distance to the sensor).

I saw a thread somewhere that recommended epoxy to attach the magnet, but I thought i would see if anyone here had any other ideas. Thanks!
 
Trail Tech has several bolt on magnets.http://www.trailtech.net/digital-gauges?replacement_part_type=26
 
Back
Top Bottom