76' CB360T Brat

jazon

New Member
I have been around the forum for awhile and have nagged quite a few members...here is where my project is currently.

Before:

CIMG2513.jpg


After:

100_1796.jpg


100_1797.jpg


100_1794.jpg


100_1793.jpg




Existing issues: (any advice on either is GREATLY APPRECIATED)

-left side power is intermittent
-loss of power on hills(surely due to the first issue)

Thanks for looking.
 
I forgot you are from PA- where about again?

Well, the left side could be a couple things. Have you re jetted since the rebuild? If so, then it's most likely the valves, weak spark, or clogged jets.

While I can dig the look you have going on, I highly recommend some muffs on there. Those and some better intakes would make tuning much easier.
 
Yes sir Big Rich, from Williamsport. What about you?

The carbs and engine were rebuilt. The coils, plug caps, plug wires and plugs are brand new and in working order.

Any suggestions on the muffs and intakes? I would prefer not to unless it is 100% necessary.

I have adjusted the points and compression strokes accordingly, however it was my first time messing with it. Could this be the reason for my issues?
 
apreludem said:
back from the grrraaaavvveee...
question, will a cb360 tank fit on a cb400?

ANY tank will fit ANY bike depending how much work you are willing to do.

For future reference, there is a place for questions like this. And it's not randomly thrown in someone's building thread.
 
Back
Top Bottom