Post a pic of your latest purchase

I bought a 2001 er5 engine. Had to take everything attached to it as a part of the deal.
 

Attachments

  • IMG_20180405_105252.jpg
    IMG_20180405_105252.jpg
    73.4 KB · Views: 385
Well I needed a parallel twin with about 50hp and wanted it to be 6 speed, heaps of available parts and air cooled. I missed out on the air cooled but that is ok. Plan is to get it running and see if it fits in a frame I have...

That frame cannot be registered due to it being a write off. Check out the bend in the left fork leg.
 
Few OEM bits and chain and sprockets. ..
 

Attachments

  • 20180407_191320.jpg
    20180407_191320.jpg
    1 MB · Views: 159
  • 20180407_191432.jpg
    20180407_191432.jpg
    340.8 KB · Views: 159
Picked up a used Bluestar gas range already converted to propane for the cottage.

Selling my old propane stove for more than I paid for this Bluestar, which is a sweet deal :)
 

Attachments

  • IMG_0448.jpg
    IMG_0448.jpg
    2.3 MB · Views: 161
Jiu Jitsu mats for a school my youngest is opening in New Mexico.
 

Attachments

  • Fuji mats.jpg
    Fuji mats.jpg
    143.1 KB · Views: 153
Aerial shot out of a cheap drone we picked up for “farm use” haha

24a9e0277b061406942ac78740e935e8.jpg


Unfortunately the video range is horrible so i will try to fix that with a tx03 soon.
Control range is nice though, way further than i can track without binoculars.
 
Tim said:
Picked up a used Bluestar gas range already converted to propane for the cottage.

Selling my old propane stove for more than I paid for this Bluestar, which is a sweet deal :)

Tim, Why are you Baking your tape ruler? ;D

11494-130418210322.png
 
Set of shoes for the wheels. They are very nice Nokian Rotiiva's mounted easy, inflated and test road, didn't need to take them anywhere be balanced, smoothe all the way to 85MPH. Also did the front sway bar links and bushings so CRV is all tight and quiet again for now.
1732-160418091529.jpeg
 
I bought some knee pads. In typical British bike fashion I had to do a bit of work to get them to fit properly.
 

Attachments

  • IMG_20180418_165638.jpg
    IMG_20180418_165638.jpg
    36.2 KB · Views: 775
Back
Top Bottom